Durability Testing
Concrete durability testing: carbonation depth, chloride content and half-cell potential surveys to show whether the reinforcement is at risk of corrosion.
Defensible strength numbers, not guesswork.
Strength testing gives the engineer material evidence for what the element can carry. Durability testing investigates carbonation, chloride exposure and corrosion risk, which is what the engineer needs to decide on further investigation and repairs. We measure carbonation depth on cores and fresh breaks, send drilled samples to the laboratory for chloride content by depth, and run half-cell potential surveys across the element to map where the steel is likely to be corroding. The results are plotted against cover depth from a Ferroscan survey, so the engineer sees where the carbonation front or the chlorides have reached the bar and where they have not.

Where it helps
- When carbonation, chloride exposure or reinforcement corrosion is being investigated
- When the engineer needs test evidence to plan further investigation or repairs
What you receive
- Test and sample locations recorded on a plan
- Carbonation depths for the locations tested
- Chloride results by sampled depth where commissioned
- Half-cell potential map where commissioned, with reference electrode and conditions recorded
- Partner laboratory certificates for laboratory tests
- Corvus report and DXF/DWG test plan, with cover comparisons where surveyed
A note on interpretation. The selected tests provide evidence of durability and corrosion risk. Half-cell potentials do not measure steel loss or corrosion rate. Remaining service life is not established by these tests alone.
Often surveyed together.
GPR Concrete Scanning
Ground penetrating radar scanning that finds rebar, post-tension cables, conduits and voids hidden inside concrete, before they become a problem.
Learn moreFerro Scanning
Electromagnetic scanning to map reinforcement, measure cover depth, and estimate bar diameter without touching the concrete.
Learn moreMore from Concrete Testing.
- Concrete TestingPull-Out Testing
Pull-out testing for in-situ concrete strength to BS EN 12504-3.
- Concrete TestingRebound Hammer Testing
Schmidt hammer testing for surface hardness and strength estimation.
- Concrete TestingCore Sampling
Core extraction for laboratory compressive strength testing in a UKAS facility.
Need defensible strength results?
Send the element, observed defects and the engineer's durability question. We call back the same working day.